
NodeMCU Base Shield Ver 1.0 expansion board for wide NodeMCU V3 LoLin boards
Part number:
13509SKU: AA-009013509Expansion board (Base Shield Ver 1.0) for NodeMCU V3 LoLin (CH340) with DC 6–24 V power jack and GND/VCC pin duplication
The NodeMCU Base Ver 1.0 expansion board turns the NodeMCU V3 development module into a full-featured controller for stationary smart home systems, automation and robotics. With a built-in power regulator, there is no need for a USB adapter, and the routed power and ground pin rows allow you to neatly and reliably connect dozens of modules, relays and sensors. Features: • Convenient duplication of all pins (GPIO, 3V3, 5V/VIN, GND): each signal pin is brought out as a header with separate power and ground lines alongside it, allowing you to connect many sensors and servos with DuPont wires without a breadboard. • Built-in switching step-down converter (DC-DC): allows the controller and connected peripherals to be powered from an external 6–24 V power supply via a standard 5.5×2.1 mm DC jack. • Designed specifically for the wide form factor of the NodeMCU V3 LoLin (CH340): the distance between the mounting rows is about 28 mm. • Mounting holes at the corners of the board for rigid fixing of the assembly in a project enclosure or on a robot chassis.
No specifications provided.
- ["Совместима исключительно с платами NodeMCU V3 LoLin (CH340), внешними блоками питания DC 6–24 В (разъем 5.5×2.1 мм) и стандартными модулями с разъемами DuPont."]
No files uploaded.
Frequently bought together







830-Pin Breadboard Kit for Arduino96,600 sum