
Single-channel transistor optocoupler (optoisolator) PC817 in DIP-4 package for galvanic isolation of circuits (isolation voltage up to 5000 V)
Part number:
13071SKU: AA-009013071PC817 transistor optocoupler in DIP-4 package for galvanic isolation of signals, repair of switch-mode power supplies and protection of microcontrollers
The PC817 optocoupler consists of an infrared LED and a phototransistor combined in a single light-tight DIP-4 package. Signals are transmitted optically, with no direct electrical contact between input and output. The component is essential for repairing switch-mode power supplies (in the voltage stabilisation circuit together with TL431) and for designing load control circuits where the microcontroller port must be protected from voltage surges and interference.
Features:
• Reliable galvanic isolation (up to 5000 V RMS): fully isolates low-voltage microcontroller logic (Arduino, ESP32, STM32) from high-voltage or noisy power circuits (switch-mode power supplies, relays, triacs).
• Classic 4-pin DIP-4 package (2.54 mm pitch): convenient for through-hole mounting on printed circuit boards (THT), installation in sockets, and use on solderless breadboards.
• Versatile electrical parameters: maximum collector-emitter voltage $V_{CEO}$ of 35–80 V (depending on revision), collector current up to 50 mA, current transfer ratio (CTR) in the range 50–600%.
• Wide use in repair and DIY projects: a standard feedback element in switch-mode power supplies (chargers, TV boards, home appliances) and input stages of industrial automation.No specifications provided.
- ["Является полным функциональным и посадочным аналогом оптопар EL817 (Everlight), LTV-817 (Lite-On), KPC817 и TLP621; совместим с любыми макетными платами и печатными платами под корпус DIP-4."]
No files uploaded.
Frequently bought together




Red Crab Rosin Flux Paste 5 g1,900 sum


Similar products





IRFB4110 MOSFET Transistor6,300 sum
TDA7388 Chip16,800 sum
MOSFET IRF840 (ORG)6,100 sum


Transistor IRF3205, 55 V, 110 A5,900 sum